Access Point Type Indoor, dual radios concurrent, 5GHz 802.11 ac 2x2 MIMO is back-wards compatible with 802.11 a/n mode, 2.4GHz 802.11 n 2x2 MIMO is backwards compatible with 802.11 b/g.

	SU-MIMO Two(1) spatial stream SU-MIMO for up to 1,267 Mbps wireless data rate to a single wireless client device.

	MU-MIMO Two(1) spatial stream MU-MIMO for up to 867 Mbps wireless data rate to transmit to two(2) MU-MIMO capable wireless client devices simultane-ously.

	Frequency Radio 2.4GHz: 2400MHz to 2835MHz, 5GHz: 5150MHz to 5250MHz, 5250MHz to 5350MHz, 5470 to 5725MHz, 5725MHz to 5850MHz Support radios and channels

Supported Radio Technology 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11ac/a/g/n: Orthogonal frequency-division multiplexing (OFDM) 802.11n/ac: 2x2 MIMO with 4 streams 802.11ac supports very high throughput (VHT) - VHT 20/40/80 MHz 802.11n supports high throughput (HT) - HT 20/40 MHz 802.11n supports very high throughput under the 2.4GHz radio -VHT40 MHz (256-QAM) 802.11n/ac packet aggregation: A-MPDU, A-SPDU

	Supported Modulation Type 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

	Transmit Power (Maximum Value) 2.4GHz: 21dBm 5GHz: 21dBm

	Tx Beamforming (TxBF) Increasing signal reliability and transmitting distance. Supported data rates (Mbps) 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15) 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS1 to 2)

	Power Maximum Power Consumption: 10W Power Source: - Direct DC Input: 12V/1A - Power Over Ethernet: 802.3af Input

	Antenna EAP1300EXT: (External Antenna) - 2.4GHz: Two detachable 5.0dBi RP-SMA antennas - 5GHz: Two detachable 5.0dBi RP-SMA antennas

	Interfaces Networking Interface: One (1) 10/100/1000 BASE-T RJ-45 Ethernet Ports DC Powering Interface: One (1) DC Jack interface LED Indicators: Display system and wireless transmission status Reset Button: Convert Access Point to the Factory default or the Users Default

	Mounting Ceiling Mounting: Assemble a mounting bracket for drop ceiling Wall Mounting: Mount Access Point on a flat wall

	Environment Operating Temperature: 0oC to 40oC (32oF to 104oF) Operating Temperature: Humidity: 0% to 90% typical Storage Temperature: -30oC to 80oC (-22oF to 176oF) Storage Temperature: Humidity: 0% to 90% typical

	Compliance Regulatory FCC: - Subpart15 B - Subpart C 15.247 - Subpart E 15.407 CE: - EN 300 328 - EN 301 893 - EN 50385 - EN 60601-1-1 - EN 60601-1-2 - EN 55032 - EN 55024 R and TTE Directive 1995/5/EC Low Voltage Directive 72/23/EEC

	Item Dimension (L inchxW inchxH inch) 12 x 9 x 3 Weight 2.00 lb Warranty Information 1 Year