blank
Advantech LCD Kits
/ Open Frame
IEI PICMG Backplane
Your PICMG Solutions
Innodisk SATA DOM
Intel Mini-itx Motherboards
Portwell Neworking Appliance
Jetway JNF797T2-Q370 Motherboard, Mini-ITX, LGA1151, Q370, Coffee Lake, 9-36V, TPM 2.0
Images shown for reference only
Shipping Extra

ATACOM Part #:IMBM_JETA_I1_15

Manufacturer Part#:JNF797T2-Q370

 
   Price: $425.95

 
Specification
Model NameNF797
Part NumberJNF797-Q370
Form FactorMini-ITX (170 x 170mm)
Processor8th & 9th Gen Intel® Core i7 / i5 / i3 / Pentium Processor up to 65W
Socket LGA 1151 (Formerly Coffee Lake)
ChipsetIntel Q370
Memory2 x 260-pin SODIMM un-buffered Dual Channel DDR4-2666 up to 64GB Total
* Core i3, Pentium, and Celeron can only support DDR4-2400 up to 32GB Total
GraphicsRequires Intel Core processor with Intel HD Graphics
AudioRealtek ALC662VD HD Audio
LAN1 x Intel I219-LM PHY Gigabit LAN (iAMT 12.0)
1 x Intel I211-AT PCI-E Gigabit LAN
Storage2 x SATA3 6Gb/s with RAID 0, 1
1 x M.2 Slot (M-key, SATA & PCIE 3.0 x4, 2242/2260/2280)
Super IONUVOTON NCT6116D
TPMIntel fTPM 2.0 (PTT) Trusted Computing Firmware
* As of 5/11/2020, onboard TPM is now optional
Back Panel Connectors
1 9 ~ 36V DC-in Jack (1-pin 2.5mm ID, 5.5mm OD)
1 HDMI 1.4 (4096 * 2160 @ 30Hz)
2 DP 1.2 (4096 * 2304 @ 60Hz )
2 Serial Port (2 * RS232/422/485)
4 USB 3.1 Gen 2 (10 Gb/s)
2 RJ45 LAN (10/100/1000)
3 3.5mm Audio Jack

Onboard I/O Connectors
1 PCI-E x4 Side-Slot, Supports Jetway ETC4G & ETC4B Expansion Modules
1 M.2 Slot (M-key, SATA & PCIE 3.0 x4, 2242/2260/2280)
1 M.2 Slot (E-key, 2230, for WiFi)
2 SATA3 6Gb/s Connectors
2 USB 3.1 Gen 2 (10 Gb/s) Vertical Type-A Ports
2 USB Pin Header for up to 4 additional USB 2.0 Ports
1 40-pin eDP 1.3 Header (4096 x 2304 @ 60Hz)
1 Chassis Intrusion Jumper
1 AT/ATX Mode Jumper
1 8-bit GPIO Header
1 4-pin SMBUS Header
1 6-pin PS2 Keyboard Mouse Header
1 9-pin Audio Header
1 9-pin Front Panel Header
2 4-pin Fan Headers
1 2-pin +9 ~ 36V Alternate Power-in
1 SATA Power-out Connector
Power Supply for NF797
External Power Supply – the board can be powered with a +9 ~ 36V external power supply though a DC connector on the back panel. The rear +9 ~ 36V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9 ~ 36V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal +9 ~ 36V 2-pin power connector, where pin 1 is +9 ~ 36V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply.

Caution: There is no isolation circuitry between the external +9 ~ 36V DC jack and the internal 2-pin power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +9 ~ 36V DC jack is covered if the internal 2-pin power connector is to be used.
Market Segments Supported
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
Environment
Operating Temperature : 0 ~ 60°C
Storage Temperature : -20 ~ 85°C
 



Graphic Fanless Compact Engine
Jetway JBC361F35-T40E-B


Jetway JBC371F35W-T40E-B
Fanless Graphic Compact Engine


4 HDMI Ports (Optional 10 HDMI Ports)
Jetway NF83 AMD Motherboard


Jetway HBJC128F83-B Digital Signage